Programming the Levelogger

Note:

Ensure the Levelogger is operating with the latest firmware, and that you are using the latest software. Visit the Solinst website (downloads.solinst.com) or use the update notifications in the software for assistance. If older Levelogger versions are used, refer to our Compatibility Chart on the Downloads page.

  1. Connect the Levelogger to the communications device and start the software.
  2. Select the appropriate COM or USB port for the connected communications device from the centre drop-down menu.
  3. retrieve levelogger settingsClick the 'Retrieve Settings from Levelogger' icon. This will retrieve and display information about the connected datalogger, and any current programmed settings.
  4. You can now customize the Levelogger including your Project ID, Location, Sampling Mode and Rate, and Future Stop and Start times.

Tip:

save levelogger default settings If a number of Leveloggers are to be programmed with identical inputs, clicking the 'Save Default Settings' icon will create a template.

solinst levelogger water level datalogger settings window

Datalogger Settings Window

 

Note:

Clicking on the in the software will provide you with a short explanation of that feature, e.g. Com Port, Slate Mode, Time Synchronization, etc.

Rainlogger 5 Programming

solinst 3002 rainlogger 5rainfall dataloggers The Rainfall Calibration Constant 'value' of the tipping bucket rain gauge used with the Rainlogger is required when programming the Rainlogger 5. Consult the Levelogger User Guide for more information on programming the Rainlogger 5.

Levelogger 5 LTC Calibration

solinst levelogger 5 ltc water conductivity dataloggers Before deploying your Levelogger 5 LTC, be sure to calibrate the instrument. To begin calibration, open the 'Conductivity Cal' tab and follow the steps provided. Consult the Levelogger User Guide for more information, or view the LTC Calibration Video on our YouTube Channel: https://www.youtube.com/user/SolinstCanadaLtd